Care Guide
How to Hang & Care for Canvas Wall Art
Every canvas ships ready to hang, with saw-tooth hardware and rubber bumpers already fitted to the frame. Most sizes need just one nail or hook. Here is the rest: hardware by size, how high, spacing, walls, and care.
Ready to hangHardware by sizeCare by finish
At a glance
- Small canvas
- 1 nail or hook
- Large (40x30+)
- 2 hooks, level
- Hang center
- 57 to 60 in
- Set spacing
- 2 to 3 in
Hanging by size and weight
A stretched canvas is light. It is fabric printed with water-based inks over a knot-free wooden frame, so even large pieces weigh far less than a glass-fronted frame the same size. Match the hook to the piece and the wall, not to a worst-case guess.
| Small (up to 20 x 16") | The pre-fitted saw-tooth hanger plus one nail or a small picture hook holds it. Adhesive strips work here too. |
| Medium (24 x 18" to 36 x 24") | One picture hook rated above the piece weight, into a stud where you can. On bare drywall, a self-drilling anchor. |
| Large (40 x 30" and up) | Two hooks or anchors, set level and a little in from each side, to stop a wide canvas tilting and spread the load. |
Want an exact size before you buy? The free Wall Art Size Calculator gives a recommendation in seconds.
How high to hang it
Place the center of the artwork about 57 to 60 inches from the floor. That is gallery eye level, and it looks right in most rooms.
Above furniture, leave 6 to 10 inches between the top of a sofa, headboard, or console and the bottom of the frame. In a stairwell, follow the line of the stairs. In a kids room, hang a little lower.
Spacing a multi-piece set
For a set or gallery wall, keep the gaps consistent. Two to three inches between pieces is the standard for a grid, and it is the spacing that makes a set look intentional instead of scattered.
- Plan before you drill. Cut paper templates, tape them up, and live with the layout for a day.
- Grid layouts want equal spacing all around.
Plan a layout on screen with the free Gallery Wall Planner. Starting from a set? Browse gallery wall sets and three-piece sets.
What different walls need
| Drywall / plasterboard | The easiest. A stud is the strongest anchor. Between studs, use a self-drilling drywall anchor sized to the piece. |
| Plaster (older homes) | Drill a small pilot hole first and use a proper wall anchor. Avoid hammering a nail straight in. |
| Brick or concrete | Use a masonry bit and plastic or sleeve anchors. Drill into the brick face rather than the softer mortar line. |
| Tile | Use a tile or masonry bit at low speed and anchors rated for tile, or adhesive strips rated for the weight. |
Care and cleaning
Dust it dry
Wipe gently with a clean, dry, soft cloth. No water, glass cleaner, or solvent on the printed surface.
Mind sun and moisture
UV-protected, but avoid all-day direct sun and hanging directly over a shower, stove, or humidifier.
Get the size right first
Our free tools take the guesswork out of choosing a size and seeing it on your wall, before you order.
Questions about a specific piece or wall? Email mail@luxurywallart.com. For how your order is made and shipped, see shipping and returns.
Wishlist
